www.prolight.co.uk
Matrix Tri Pixel Panel 25 MKII
User Manual
14
Rigging:
NOTE: The installation of this unit must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to the property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials should
be used and the installed unit should be inspected regular intervals for safety.
Before rigging overhead:
- Make sure the area below the installation place is free from unwanted persons during rigging,
de-rigging and servicing.
- Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
- The device should be installed out of reach of people and outside areas where persons may walk by or
be seated.
- Before rigging make sure that the installation area can hold a minimum point load of 10 times the
device’s weight.
- Always use a certified safety cable that can hold 12 times the weight of the device when installing the
unit. This secondary safety attachment should be installed in a way that no part of the installation can
drop more than 20cm if the main attachment fails.
- The device should be well fixed; a free-swinging mounting is dangerous and should not be used.
- Don’t cover any ventilation openings as this may result in overheating.
Rigging with supplied hanging bracket:
- The supplied hanging bracket can be used to place the unit on the floor and point it in a desired
direction. In this case a proper and stable base should be used!
- The hanging bracket can also be used to hang the unit on truss and point it in the desired direction:
- Fix 2 suitable truss clamps to the holes in the hanging bracket. Make sure that both clamps are firmly
fixed to the bracket tight and secure!
- Fix 1 or 2 suitable safety cable(s) to the safety eyes to make sure the unit cannot drop more than
20cm if the hanging bracket or clamps fail.
NOTE: Using the supplied hanging bracket you cannot fix more than one unit together.
If you want to hang a vertical array of units, you must use the optional heavy duty
Tri Pixel Panel 25 Flying bracket (ELUM085A).
Rigging
Safety wire
Truss