www.prolight.co.uk
Evora 1000 Spot
User Manual
5
Rotating Gobo Replacement:
The fixture is supplied with 7 rotating, replaceable gobos. See below for installation instructions.
1) Disconnect and isolate from power then place the
fixture on a flat surface and unscrew the head shell.
2) Remove the head shell including the safety wire
fixed to the metal head plate.
3) Carefully remove one of the gobo trays by
lifting slightly and pulling towards you releasing the
tray from the spring clip.
4) Now you can remove the circlip, followed by the
gobo from the gobo tray. Replace the gobo and fit
the circlip back into the tray.
5) Place the gobo tray back into
the gobo wheel by sliding it back
under the spring clip and pushing
it down into the wheel.
6) Fasten the safety wire from the
shell back onto the metal head
plate.
7) Tighten the screws until the
head shell is secure.
Rotating Gobo Replacement
