www.prolight.co.uk
Evora 1000 Spot
User Manual
6
Operating instructions
Control Panel Menu:
The LCD control panel situated on the front of the fixture allows the user to access the menu system to
adjust the fixtures settings.
When the unit has been powered on it will show
“Software Update Please Wait...”
followed by
“Motor
Reset Please Wait...”
and
“eLumen8 Evora 1000 Spot”
. The fixture will then return to its home screen.
Pressing the
“MENU”
button once will take the user to the fixtures main menu. Using the
“UP”
and
“DOWN”
buttons you can then navigate between the different options in the main menu. Pressing the
“ENTER”
button on one of these options allows you to access the sub menu where you can use the
“LEFT”
and
“RIGHT”
buttons to select option/value required. Once the option/value has been selected
press the
“ENTER”
button once more to confirm the setting.
To exit out of any of the above options, press and hold the
“MENU”
button.
The LCD control panel can be used via the internal battery. To access this press and hold the
“DISPLAY BACKUP”
button for 5 seconds until the fixtures home screen is displayed. The LCD
display will automatically shut off after 20 seconds of inactivity.
Error Codes:
When the unit is powered on the unit will automatically perform a motor reset. If there is a problem with
one or more of the motors the display will flash 5 times and display
“pan/tilt error”
on the LCD control
panel. Please power the unit off and on to reset the motors again.
DISPLAY BACKUP
MIC
MENU
UP
LEFT
ENTER
RIGHT
DOWN
Evora 1000 Spot
Offset Menu:
To access the units offset menu
press the
“MENU”
button once
to display
“DMX Address”
on the
LCD display. Press and hold the
“ENTER”
button until the offset
menu is displayed.
Offset Menu
Options/Values
(Default Settings in BOLD)
Description
Pan Offset
-128-127 (
000
)
Pan Offset
Tilt Offset
-128-127 (
000
)
Tilt Offset
Color Offset
-128-127 (
000
)
Color Offset
Gobo1 Offset
-128-127 (
000
)
Gobo Wheel 1 Offset
RGobo1 Offset
-128-127 (
000
)
Gobo Wheel 1 Rotation Offset
Gobo2 Offset
-128-127 (
000
)
Gobo Wheel 2 Offset
Prism Offset
000-255 (
000
)
Prism Offset
RPrism Offset
-128-127 (
000
)
Prism Rotation Offset
Focus Offset
000-255 (
000
)
Focus Offset
