www.prolight.co.uk
DB1300 DMX Stage Blinder
User Manual
7
Operating instructions
To set the fixture into
“Manual
Mode”,
set dipswitches
“9”
and
“10”
to the
“ON”
position. The
brightness of the two lamps can
then be adjusted via dipswitches
“5”
to
“8”.
To set the fixture into
“Auto
Mode”,
set dipswitch
“10”
to the
“ON”
position. The dim speed of
the two lamps can then be ad-
justed via dipswitches
“1”
to
“8”.
When dipswitches
“1”
to
“8”
are
“ON”
the dim speed is very slow
.
When dipswitches
“1”
to
“8”
are
“OFF”
the dim speed is very fast
.
To use the fixture in
“DMX
Mode”,
use dipswitches
“1”
to
“9”
to set the desired DMX
address.
Addressing
Each device occupies 1 channel. To ensure that the control signals are properly directed to ach device
the fixture requires addressing. This needs to be changed for every fixture by changing the dipswitches
as set out in the table below. The starting address is defined as the first channel from which the
device will respond to the controller. Please make sure that you do not have any overlapping channels in
order to control each fixture correctly and independently from any other fixture on the DMX data link. If
two, three, or more devices are addressed similarly, they will work similarly.
Controlling
After having addressed all
devices, you may now start
operating these via your
controller.
Manual mode:
Auto mode:
DMX mode:
1
2
3
4
5
6
7
8
9 10
ON
Dark
Bright
1
2
3
4
5
6
7
8
9 10
ON
Speed
Slow
Fast
1
2
3
4
5
6
7
8
9 10
ON
DMX Address
Dipswitch number
1
2
3
4
5
6
7
8
9
DMX starting address
1
2
4
8
16
32
64 128 256
Occupation of the dipswitches:
Fixture 1 - Channel 1
ON
OFF
Fixture 4 - Channel 4
ON
OFF
Fixture 5 - Channel 5
ON
OFF
Fixture 2 - Channel 2
ON
OFF
Fixture 3 - Channel 3
ON
OFF
Channel Value
Function
1
000-255 Master dimmer
(0-100%)
1 channel mode
