www.prolight.co.uk
DB1300 DMX Stage Blinder
User Manual
3
Safety advice & installation
CABLE/LAMP INSTALLATION
Before replacing the lamp, unplug the mains lead and let the lamp cool down (for approx. 20 minutes).
During the installation do not touch the glass bulbs bare-handed! Please follow the lamp manufacturers notes.
Do not install lamps with a higher wattage. Lamps with a higher wattage generate temperatures the fixture is not designed for.
Damages caused non-observance are not subject to warranty.
For installation you will need 2 x Par 36 650W 120V DWE lamps (Order code: LAMP91).
During the operation, the lamp reaches high temperatures of up to 400°C.
To install/replace the lamp follow the procedure below:
Step 1:
Unscrew the lamp cover.
Step 2:
If replacing the lamp, remove the old lamp from the housing and loosen the screws and wires.
Step 3:
Loosen the screws on the on the new Par 36 650W 120V DWE lamp with an appropriate screwdriver.
Step 4:
Connect the wires to the lamp using an appropriate screwdriver.
Step 5
Tighten the screws.
Step 6:
Insert the lamp into the housing.
Step 7:
Screw the lamp cover back onto the fixture.
• This fixture is only allowed to be installed using the
supplied mounting bracket. In order to safeguard sufficient
ventilation, leave 0.5m of free space around the device.
• The housing must never touch surrounding surfaces or
objects.
• Always secure the fixture with an appropriate safety wire
as a security safety measure.
• Repairs, servicing and power connection must only be
carried out by a qualified technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• This lighting fixture is for professional use only - it is
not designed for or suitable for household use. The
product must be installed by a qualified technician in
accordance with local territory regulations. The safety of
the installation is the responsibility of the installer. The
fixture presents risks of severe injury or death due to fire
hazards, electric shock and falls.
• WARRANTY: Two years from date of purchase.
This does not apply to lamps or triac devices.
DB1300 Stage Blinder, 2 x Par 36 650W
120V DWE Lamps, 240V connection
The connection cable must have a
diameter of at least 3 x 1.00mm
2
.
CAUTION!
THE LAMP HAS TO BE
REPLACED WHEN IT IS
DAMAGED OR DEFORMED
DUE TO THE HEAT.
DWE
120V/650W
DWE
120V/650W
240V
E
N L
N L
DANGER TO LIFE!
THE INSTALLATION MUST
ONLY BE CARRIED OUT BY
A QUALIFIED TECHNICIAN.
DO NOT OPERATE THIS
FIXTURE WITHOUT THE
LAMP CLOSED.
DANGER TO LIFE!
ONLY INSTALL LAMPS WITH
THE FIXTURE SWITCHED OFF!
UNPLUG FROM THE MAINS
BEFORE INSTALLING LAMPS.
