12
Section 5: OPERATING INSTRUCTIONS
Do not use the eLumen8 BG615 for any purpose other than that for which it is designed –
as a portable power pack.
If more than one operator is expected to set up or use a eLumen8 BG615 at different
times, each operator is required to follow all safety rules and instructions in the operator’s
manual. That means every new operator should perform a pre-operation inspection and
function tests before using the unit.
5a) PRE-OPERATION INSPECTION
Always perform a pre-operation inspection.
The Pre-operation inspection is a visual inspection performed by the operator prior to
each use of the eLumen8 BG615. This inspection is designed to discover if anything is
obviously wrong with a unit prior to use.
A damaged or modified eLumen8 BG615 must never be used. If any damage is
discovered the eLumen8 BG615 must be removed from service until it has been repaired.
Maintenance and repairs can be executed only by authorised personnel. If any person
maintaining or repairing the device is in any doubt, they should contact their supplying
dealer or Prolight Concepts (UK) Ltd.
Check the following parts or areas for any signs of damage or missing parts.
• Cables (for kinks, frays, abrasions, bare conductors showing)
• Plugs and Sockets for physical damage
• Catches and locking mechanisms.
• Make sure the case is free from cracks or areas of damage where water could enter
• Make sure all labels and warnings are present and readable on the product as
detailed below.
