Installation
11
4.2 CSi/d Autoloader connections
The three connections on the back of the CSi/d Autoloader must be connected to put it into
operation.
Fig. 1: Connections on the back of the CSi/d Autoloader
Number
Component
Description
1
Pneumatic connection
Connection for the pneumatic connection to the
analyzer
2
Electrical connection
Connection for the power supply
3
Analyzer connection
Connection for communication between the
analyzer and CSi/d Autoloader
Proceed as follows to connect the CSi/d Autoloader:
1.
With the help of the supplied pneumatic hoses and the tee, connect the
pneumatic connection on the CSi and the CSi/d Autoloader (
1
) (see Fig. 1:
Connections on the back of the CSi/d Autoloader).
2.
Connect the tee to your compressed air supply.
3.
Connect the connection inside the analyzer to the analyzer connection (
3
)
(see Fig. 1: Connections on the back of the CSi/d Autoloader).
4.
Connect the power supply unit provided to the electrical connection (
2
) (see
Fig. 1: Connections on the back of the CSi/d Autoloader).
The CSi/d Autoloader has now been connected.
1
2
3
