Installation
10
4
Installation
4.1 Setting up the CSi/d Autoloader
Proceed as follows to set up the CSi/d Autoloader:
1.
Place the CSi/d Autoloader to the right of the analyzer.
2.
When setting up ensure there is a stable, non-slip and fireproof base, and
comply with the following safety instructions in this respect.
The CSi/d Autoloader has now been set up and can be installed.
DANGER
D4.0006
Danger caused by burning samples
– Damage to the respiratory tract, skin and/or mucous membranes.
– Radiation damage.
Users themselves must assess the risk emanating from a sample
during analysis.
WARNING
W2.0021
Fire hazard / risk of burns caused by hot components
Hot components
(crucibles
, reagents etc.
) can fall down
Surfaces onto which the hot component can fall catching fire.
Clothing and other materials catching fire.
Set the Autoloader up in a fireproof environment. Pay special
attention to the desk, floor and other surfaces near the Autoloader
.
Always wear suitable work clothes.
Keep the work area free from all materials that could catch fire.
Do not set the Autoloader up in any explosive atmosphere.
CAUTION
C7.0092
Risk of injury caused by the Autoloader falling down
Incorrectly set up or insufficient workspace
– Due to its weight, the Autoloader can cause personal injuries if it falls
down.
•
Only operate the Autoloader on a sufficiently large, strong, non-slip
and stable workspace.
•
Ensure that the feet of the device are positioned securely.
