Page
76 of 88
User Manual QT series generation 2.5, ID 2021, rev 3.2, January 14, 2022
Procedure
Step
Description
Illustration
6
Disconnect the rest of the cable
connectors marked by yellow circles
in the illustration.
7
Place the interface in a secure location to avoid any damage to it.
8
Remove the four M3 hex socket head
screws holding the battery bracket by
turning them counterclockwise. The
screws are circled red in the
illustration.
Place the screws and connector in a
secure location.
Required equipment:
−
2,5mm Hexagon Key.
9
Remove the battery by sliding it out
of the frame.
Replace the battery and slide the new
battery into the frame.
10
Fasten the battery holding bracket
with the four M3 hex socket head
screws by turning them clockwise.
Tighten the screws to 1,2Nm and
lubricate the threads using Molykote
1000 or similar lubricant containing
MoS2. Make sure that the grounding
connectors are placed as shown in
the illustration before tightening the
screws. The screws are circled red in
the illustration.
Required equipment:
−
2,5mm Hexagon Key.
