Connection
The detector has a 0,5 or 3,5 m cable with a 6P4C
modular plug connector
The output is suitable for PLC or other electronic
control devices. The detectors can be connected in
parallel.
The detector is protected against reversed polarity on
the power supply
Yellow
Output A
Green
Output B
Red
Power supply (+)
15-33 V DC
Black
Power supply (-)
Output: Optocoupler, NC = normally closed
Output load: max 10 mA, 35 V DC
Max ON-STATE voltage drop: 2V DC at 10 mA
PNP
Configured as PNP output for PLC; high when yarn is
not moving.
NPN
Configured as NPN open collector output (for input
with pull-up resistor); low when yarn is not moving.
Special
Configured as optocoupler output; high when yarn is
not moving.
TH
-0
263
-10
Komp
7932
C
opy
ri
gh
t ©
El
tex
of Sw
e
de
n AB
Södra Portgatan 19 • SE-283 50 OSBY • Sweden • Tel.: +46 (0) 479 53 63 00
E-mail: [email protected] • Web: www.eltex.se
Eltex U.S., Inc.
13031 E. Wade Hampton Blvd.
GREER, South Carolina, 29651, USA
Tel.: +1 864-879-2131
[email protected]
Eltex Manufacturing Ltd.
Railway Road
TEMPLEMORE, Co. Tipperary,
Ireland
Tel.: +353 504-314 33
POLSA-ELTEX, S.L.
Zamora, 103 – entlo 3o
ES-08018 BARCELONA,
Spain
Tel.: +34 93 309 00 17
[email protected]
Eltex China (Beijing) Trading Ltd.
HongkunYun Times B4 207,
Yizhuang Kechuang 12th street,
Daxing, Beijing, China
Tel: +86 10 6506 6468
Email: [email protected]
www.eltex.cn
Declaration of conformity according to the EMC Directive 89/336/EEC
The Eltex Yarn Break Detector UPG conforms to the standard
EN 61326/A1 (1998)
