186
MES1000, MES2000 Ethernet Switches
no ip arp inspection
validate
Disable specific checks for ARP management.
ip arp inspection list create
name
name:
1..32 characters
1. Create static ARP match list.
2. Enter the ARP list configuration mode.
no ip arp inspection list
create
name
Remove static ARP match list.
ip arp inspection list assign
vlan_id
name
name:
1..32 characters
vlan_id:(1 .. 4094)
Assign static ARP match list for the selected VLAN.
no ip arp inspection list
assign
vlan_id
Cancel static ARP match list assignment for the selected VLAN.
ip arp inspection logging
interval
{
seconds
|
infinite
}
(0..86400, infinite)/5
seconds
Define the minimum interval between ARP information
messages, sent to the log.
- set '0' value to generate messages immediately
infinite—do not generate the log messages
no ip arp inspection
logging interval
Restore the default value.
Ethernet interface configuration mode commands (interface range), port group interface
Command line request in Ethernet interface, port group interface configuration mode appears as
follows:
console(config-if)#
Table 5.220 —Ethernet interface configuration mode commands, interface group
Command
Default value
Action
ip arp inspection trust
The interface is not trusted
by default.
Add the interface into the trusted interface list, when ARP
management is used. Trusted interface ARP traffic is deemed
as safe and not controlled.
no ip arp inspection trust
Remove the interface from the trusted interface list, when
ARP management is used.
ARP list configuration mode commands
Command line request in ARP list configuration mode appears as follows:
console#
configure
console(config)#
ip arp inspection list
create
spisok
console(config-arp-list)#
Table 5.221 —ARP list configuration mode commands
Command
Action
ip
ip_address
mac
mac_address
Add IP and MAC address static match.
no ip
ip_address
mac
mac_address
Remove IP and MAC address static match.
EXEC mode commands
Command line request in EXEC mode appears as follows:
console#
Table 5.222 —EXEC mode commands
Command
Value
Action
show ip arp inspection
[gigabitethernet
gi_port
|
fastethernet
fa_port
|
port-channel
group
]
gi_port: (1..3/0/1..28);
fa_port: (1..3/0/1..24)
group: (1..8)
Show ARP Inspection configuration for the selected
interface/all interfaces.
show ip arp inspection list
-
Show static IP and MAC address match lists (this command is
