52
User Manual, Part III
Subscriber access/aggregation node МA4000-РХ
12
SERVICE CONFIGURATION
12.1
SNMP Configuration
Step 1. Enable SNMP agent using the
ip snmp agent enable
command:
ma4000(config)# ip snmp agent enable
Step 2. Define the SNMP device name using the
ip snmp agent system name
command:
ma4000(config)# ip snmp agent system name ma4000
Step 3. Define SNMPv3 EngineID:
ma4000(config)# ip snmp agent engine id test
Step 4. Define the SNMP trap destination server. Pass SNMP Trap version and destination IP
address as parameters.
ma4000(config)# ip snmp agent traps informs 192.168.1.100
Step 5. Define SNMPv2 community, if necessary.
ma4000(config)# ip snmp agent community readonly public
Step 6. Add SNMPv3 users using the
ip snmp agent user add
command. Pass username, password
(8-31 symbols) and access mode as parameters.
ma4000(config)# ip snmp agent user add test test ro
Step 7. Apply the configuration using the
commit
command:
ma4000(config)# do commit
12.2
System Log Configuration
Step 1. Define the level of messages, that will be sent to the console and the remote CLI sessions
(SSH and Telnet).
ma4000(config)# logging console debug
ma4000(config)# logging monitor debug
Step 2. Define the maximum system log file size. When the file size is exceeded, the system will
perform the rotation.
ma4000(config)# logging file-size 1000
Summary of Contents for MA4000-PX
Page 9: ...User Manual Part I 9 МA4000 РХ Subscriber Access and Aggregation Point PART I GENERAL ...
Page 87: ...User Manual Part IV 87 Subscriber access aggregation node МA4000 РХ PART IV ONT CONFIGURATION ...
Page 163: ...User Manual Part VI 163 Subscriber access aggregation node МA4000 РХ PART VI MAINTENANCE ...
