ELTEX MA4000-PX, Operation And Maintenance Manual

Page: 145 / 181

User Manual, Part V 145
Subscriber access/aggregation node МA4000-РХ
38 ACCESS NODE RUN-TIME LOG
To view a list of logs, show log command shall be used:
ma4000# show log
Log files
~~~~~~~~~
## Name Size in bytes Date of last modification
---- -------------------- ---------------- -------------------------
1 daemon 450 Thu Sep 11 16:59:14 2014
2 pp 126432 Thu Sep 11 16:59:46 2014
---- -------------------- ---------------- -------------------------
Totalfiles: 2
Table 24
—
Purpose of run-time logs
Name Description
daemon Log messages of МА4000 auxiliary services get saved in the log
pp Log messages of master PP4X module get saved in the log
pp-other Log messages of slave PP4X module get saved in the log
slot Log messages of definite interface module get saved in the log.
To view run-time log, show log command shall be used. Transmit log name as a parameter.
ma4000# show log pp
2014-09-11 16:58:10 rebootd started
2014-09-11 16:58:10 cli-mgr <main>
2014-09-11 16:58:10 cli-mgr <climgr_initialize>
2014-09-11 16:58:10 cli-mgr <main_loop>
2014-09-11 16:58:10 switch %SWITCH: starting up
2014-09-11 16:58:10 switch %SWITCH: start
2014-09-11 16:58:10 syslog-ng syslog-ng starting up; version='3.2.3'
2014-09-11 16:58:10 switch %STARTUP: init
2014-09-11 16:58:10 switch %STARTUP: Position is left
2014-09-11 16:58:10 switch %STARTUP: ShelfId is 15
2014-09-11 16:58:10 switch %FACTORY: reading factory settings...
2014-09-11 16:58:10 switch %FACTORY: OK
2014-09-11
16:58:10 switch %PARSE-CFG: processing configuration file
"/tmp/boot.conf.1"...
2014-09-11 16:58:10 switch %PARSE-CFG: Operation successful.
2014-09-11 16:58:10 switch %PARSE-CFG: Operation successful.
2014-09-11 16:58:10 switch %PARSE-CFG: Operation successful.
2014-09-11 16:58:10 switch %PARSE-CFG: Operation successful.
2014-09-11 16:58:10 switch %PARSE-CFG: Operation successful.
2014-09-11 16:58:10 switch %PARSE-CFG: Operation successful.
2014-09-11 16:58:10 switch %PARSE-CFG: parse config: ...done.
2014-09-11 16:58:11 switch Device[0] ID 0xE00D11AB revision B1 or above
...
Log messages may be filtrated. Use show log<journal> grep command to do that. A string of
symbols used for making a search in the log is a command parameter. Only those messages that
comprise this string will be displayed on the screen.
ma4000# showlogppgreppp4x
2014-09-11 16:58:57 switch %FIRMWARE: by entering 'firmware pp4x confirm unit 1'
command in the CLI.
2014-09-11 16:59:46 switch %FIRMWARE: 'firmware pp4x confirm unit 1' command
entered.