OLT LTP-16N, LTP-16NT. User Manual
63
•
•
1.
2.
3.
Step 2.
To specify ONT settings, go to the corresponding
view
with the help of the
interface ont
command. Specify ONT serial number.
LTP-16N# configure terminal
LTP-16N(configure)# interface ont 1/1
LTP-16N(config)(if-ont-1/1)# serial ELTX0600003D
Step
3.
Apply the configuration by using the
commit
command.
LTP-16N(config)(if-ont-1/1)# do commit
5.2.4.6 Service configuration in the ont-mode bridge mode
Consider configuring a mixed scheme of services built on different traffic-model. ONT will be configured in the
bridge mode.
Configure 3 services:
HSI and IPTV unicast, by traffic model N-to-1, the service VLAN is 200, the tag will be taken on the ONT,
untagged traffic will come from the ONT port.
Multicast, packets will come on OLT with tag 98. From the ONT port is also not tagged.
Under the 1-to-1 model, with a service VLAN 100, in a separate bridge group, the ONT port will come out
with a tag 10. Tag replacement will take place on the OLT.
Figure 20 – Abstract representation of the test configuration