manualshive.com logo in svg

ELTEX LTP-16N, User Manual, Page: 70 / 80

Share
Download
ELTEX LTP-16N User Manual Download Page 70

  OLT LTP-16N, LTP-16NT. User Manual

70

6.2  Terminal operation log

Use the 

show log

 command to view log files.

LTP-16N# show log files 
    
##    Name          Size in bytes       Date of last modification
1   LTP.log          4073                Mon Nov 16 15:57:04 2020
Total files: 1

Use the 

show log

 

buffer

 command to view a local terminal operation log buffer.

LTP-16N# show log buffer 
syslog-ng starting up; version='3.20.1'
16 Nov 15:55:41 NOTICE USRMGR         - User-manager started. 
16 Nov 15:55:41 NOTICE NETWORK-MGR    - Network-manager started. 
16 Nov 15:55:41 NOTICE LOGMGR         - Log-manager started. 
16 Nov 15:56:20 NOTICE DNA            - DNA start 
16 Nov 15:56:51 NOTICE DNA            - 10G-front-port 4 changed state to active_working 
...

When a remote syslog server is used, use the log display tools provided by the syslog server.

Enter 

show log <filename>

 command to view the files.

LTP-16N# show log LTP.log

6.3  Active alarms log

To view the active alarms log, use the 

show alarms

 command. Pass the type of events and/or their importance 

as parameters. You can view all active alarms by using the 

show alarm active all

 command.

LTP-16N# show alarms active all
    Active alarms (2):
     ## type           severity            description
     1 fan            critical            fan slot 1
     2 fan            critical            fan slot 2

6.4  10G-front-port monitoring

6.4.1  View port statistics

For 10G-front-port statistics, use the 

show interface 10G-front-port 1 counters command.

 If you want 

advanced statistics, enter the verbose parameter.

Summary of Contents for LTP-16N

















































































Reviews:

No comments