ELTEX ESR Series User Manual Download Page 36

Page: 36 / 575

ESR-Series. User manual

•
•

Table 11 – Description of connectors, LEDs and controls located on ESR-3100 front panel

№

Front panel
element

Description

Status

Current device status LED.

Alarm

Alarm LED.

VPN

VPN gateway operation mode LED.

Flash

Activity of exchange with data storage

–

SD card or USB Flash.

Power

Device power LED.

Master

Failover mode operation LED (is not supported in the current version).

Fan

Fan operation LED.

RPS

Redundant power supply LED.

Functional key that reboots the device and resets it to factory default configuration:

Pressing the key for less than 10 seconds reboots the device;
Pressing the key for more than 10 seconds resets the terminal to factory settings.

Console

Console port RS-232 for local management of the device.

SD-card connector.

USB1

USB 3.0 port for USB device connection.

USB2

USB 3.0 port for USB device connection.

[1 .. 8]

8 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45).

XG1 – XG8

Slots for 10G SFP+/1G SFP transceivers.

Summary of Contents for ESR Series
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ESR Series

Reviews:

Related manuals for ESR Series

Brands by name

Popular brands

ELTEX ESR Series, User Manual

Search results

Summary of Contents for ESR Series

Reviews:

Related manuals for ESR Series

Brands by name

Popular brands