ESR Series Routers Operation Manual
101
Define receiver-server of Trap-PDU messages
esr(config)# snmp-server host 192.168.52.41
Configuration changes will take effect when the configuration is applied:
esr#
commit
Configuration has been successfully committed
esr#
confirm
Configuration has been successfully confirmed
7.35
BRAS (Broadband Remote Access Server) configuration
Objective
: Provide access to the Internet only to authorized users.
Fig. 7.3
–
Network structure
Solution:
SoftWLC server keeps accounts data and tariff plan parameters. You can obtain more detailed
information on installation and configuring SoftWLC server using following links:
http://kcs.eltex.nsk.ru/articles/960
-
general article of SoftWLC
;
http://kcs.eltex.nsk.ru/articles/474
-
SoftWLC installation from repositories.
The BRAS license is obligatory for router, after its activation you can start device configuring.
Create 3 security zones, according to the network structure depicted in
Fig. 7.3:
esr#
configure
esr(config)#
security zone trusted
esr(config-zone)#
exit
esr(config)#
security zone untrusted
esr(config-zone)#
exit
esr(config)#
security zone dmz
esr(config-zone)#
exit
Configure public port parameters and assign its default gateway:
esr(config)#
interface gigabitethernet 1/0/1
esr(config-if-gi)#
security-zone untrusted
esr(config-if-gi)#
ip address 203.0.113.2/30
