The Smartpack S Controller
User Guide •
Smartpack S Controller
7
350030.013, 1v0-2012-06
Installing Smartpack S Controllers
Removing Smartpack S Controllers
To remove the
Smartpack S
controllers, do following:
1. Unlock the controller
by
using a screwdriver to turn the locking screw ¼
of a turn clockwise to the unlocked position 2
Notice:
the display unit is locked, and cannot be
pulled out
2. Remove the controller
by
using the rectifier’s handle to pull the module
loose. Support from underneath before the unit
is completely free
3. Mount blind panels
in
unused controller or rectifier locations
Mounting Smartpack S Controllers
To mount the
Smartpack S
controllers, do following:
1. Unlock the controller
by
using a screwdriver to turn the locking screw ¼
of a turn clockwise to the unlocked position 2
Notice:
the controllers may be inserted in the
power shelf with the locking screw in both
locked and unlocked positions
2. Insert the controller
by
sliding it fully into the power shelf, so that it
makes proper contact. Support from underneath
3. Lock the controller
by
using a screwdriver to turn the locking screw ¼
of a turn counterclockwise to the locked posi-
tion 1. Then, the controller will be securely
locked in the shelf, or ready for transport
Notice:
the display unit is unlocked, and can be
pulled out slightly to access the Ethernet port
Mounting or Removing Blind Panels
Always mount blind panels in unused controller or
rectifiers’ locations. Do following:
• To mount a blind panel
insert the panel in an unused location
until the panel engages and locks into
position
• To remove a blind panel
push the panel’s handle downwards and
pull out to release the panel
1
unlock; pos 2
display
)
cw
2
Locking
Screw
Controller’s
handle
1
(
unlock; pos 2)
cw
2
Locking
Screw
Controller’s
handle
3
(
lock, pos 1)
(4)
(Display)
ccw
Insert
Removing:
Push down and
pull out to release
Blind
panel
Blind panel’s
handle