Hard
w
are
Installation
Hardware Installation
User's Manual
PC_EYE®2+
2—7
All signals with 1.0 Vpp level are AC-coupled and terminated with 75 Ohm
to GND.
The connector case of all connector X100 and X101 is connected to shield
potential which is separated from signal ground. If only the video inputs are
required a standard VGA monitor cable with BNC connectors on the
monitor end may be used.
Power supply output:
On pin 15 12V are delivered to supply the
video camera. The current that can be drawn from this pin is limited
with a PTC resistor (Imax ca. 1100 mA).
