37
www.elt.es
11.3. Quick start guide
Download and install the
iSOFT programming software.
Activate and configure the
features and dimming modes.
Download the selected
configuration via the iSOFT
programming interface.
Your driver is ready to use.
Programming the iLC drivers is a simple process. All you have to do is download and install the iSOFT programming
software into your computer, select the required parameters and dimming modes for your application and then send
the configuration to the driver following the connection layout illustrated below. Once the desired configuration has
been sent, the driver is ready to use.
NOTE:
As the connection layout illustrates, the driver has to be connected to the power grid.
External power supply
Alimentación eléctrica externa
(Optional for more than 4 control gears
Opcional para más de 4 equipos)
EIAJ-2 connector
(for>4 control gears)
Conector EIAJ-2
(para > 4 equipos de control)
DA (+)
L N
DA (-)
USB 2.0
Overload
External DALI power supply
Communication
Internal DALI power supply
Power ON
Program
Programming interface
for eSMART control gears
USB 2.0 Power 6V / 1A DC
( for >4 control gears )
Made in Spain (EU)
R
iProgrammer
DA ( )
DA ( )
iLC
R
Made in Spain (EU)
N
DA
DA
NTC
LED
L
WARNING: The iProgrammer programming interface connection to the iLC control gear must take place via the
DALI terminals marked “DA”. The connection of the iProgrammer programming interface to other device terminals
runs the risk of breakdown.
