7
Elektroniksystem i Umeå AB Industrivägen 12, 90130 Umeå, Sweden
E-mail:
Web:
Installation
1.
Remove the back panel of the sensor with a small screwdriver.
2.
Install the batteries. The ERS CO
2
Lite requires one or two AA batteries.
The battery type is 3.6V Lithium Battery (ER14505). You can use one
battery, but
it’s
recommended that you use two for best performance
and battery life. Use battery slot A if only one battery is used.
3.
Caution: Using batteries other than the ones provided may result in loss of performance
and battery life, and also damage to the device. Dispose of properly, observing
environmental protection rules.
