9
Elektroniksystem i Umeå AB Industrivägen 12, 90130 Umeå, Sweden
E-mail:
Web:
Sensor configuration
All sensor settings can be configured via a smartphone application with NFC
(Near Field Communication) or over the air via the network server and downlink
data to the sensor. The sampling rate, spreading factor, encryption keys, port,
and modes can be changed. All sensor settings can be locked from the server or
NFC to make end-users unable to read or change settings on the sensor.
NFC Configuration
1.
Download ELSYS
“
Sensor Settings
”
application from Google Play and install
it on a smartphone or tablet. The device must support NFC.
2.
Enable NFC on the device and start the application.
3.
Place your device on top of the NFC antenna on the sensor.
4.
Remove the device. Current settings will be displayed in the application.
5.
Use the application to change any settings if needed.
6.
Quickly tap the device on top of the NFC antenna to give the new settings
to the sensor. Make sure that the application confirms your new settings.
7.
Wait for the sensor to reboot (5 sec), indicated by the LED flashing. Sensor
settings have been updated.
See the section
“
Help
”
in the application for more information.
