manualshive.com logo in svg

Elster F96Plus, Installation And User Manual, Page: 39 / 60

Share
Download
Elster F96Plus Installation And User Manual Download Page 39

39 

L-Bus module 

NOTE 

The board contains a 2 wire terminal with marking “Dat“ and “

┴

“ (Fig. K, page 19). 

  Connect the cable of the external radio module with the marked terminals. 

6.3.2 Connecting function modules 

Pulse input module 

NOTE 

The board contains a 4 wire terminal with marking “I1 - 

┴

” and “I2 - 

┴

” (Fig. L, page 

19).

 

  Connect the cable for pulse input 1 to terminals “I1 - 

┴

” and the cable for pulse input 2 to terminals 

“I2 - 

┴

”. 

Pulse output module 

NOTE 

The board contains a 4 wire terminal with marking “01 - 

┴

” and “02 - 

┴

” (Fig. N, page 

20).

 

  Connect the cable for pulse output 1 to terminals “01” and “

┴

” and for pulse output 2 to terminals 

“02” and “

┴

”. 

Combined pulse input and output module 

NOTE 

The board contains a 5 wire terminal for the two pulse inputs with marking “I1 - 

┴

” 

and “I2 - 

┴

”. A 3 V DC voltage is connected to the “+” terminal and can be used as 

the supply for a flow sensor. A 2 wire terminal is also provided for the pulse output 
with marking “01 - 

┴

” (Fig. O, page 21). 

 

Connect the cable for pulse input 1 to terminals “I1 - 

┴

” and the cable for pulse input 2 to terminals 

“I2 - 

┴

”. 

  Connect the cable for the pulse output to terminals “01” and “

┴

”. 

Summary of Contents for F96Plus





























































Reviews:

No comments