5
Installation and commissioning
Temperature Sensor KNX T-UP
• Date of issue: 06.04.2011 • Technical changes reserved. Errors reserved.
The sensor may be installed and operated in dry interior rooms
only. Avoid condensation.
2.3. Composition of the sensor
2.3.1. Casing
2.3.2. Rear view of casing with sensor board
2.4. Assembly of the sensor
First of all fit the socket with connection. Seal inlet pipes to avoid infiltration.
Then screw the base plate onto the socket and position the frame of the switching pro-
gramme. Connect the bus line +/- (black-red plug) to the terminals provided on the sen-
Fig. 1
1
Notches
2
Air circulation holes
3
Programming LED (recessed)
4
Programming button (recessed)
for teaching instrument
5
Air circulation holes (BOTTOM)
5
2
3
4
1
Fig. 2
1
Slot for KNX terminal BUS +/-
2
Notches
2
1
