106
Automatic
CasaConnect KNX Control Center
• Version: 13.09.2021 • Technical changes and errors excepted.
nights. If the twilight value is set below 10 lux, shades that are set for "Night closing"
remain open due to the moonlight or open during the night.
Twilight:
Displays the twilight limit value. Tap the field to adjust the value using the slide regu-
lator.
Default setting: 10 Lux.
6.3.2. Adjust movement delays (shades)
System > Set automatic > General settings > Movement delays
The movement delay prevents the sun protection from constantly opening and closing
if the sunlight conditions keep changing quickly.
The brightness has to be above the light intensity value set for the sun protection un-
interrupted for the extension delay period (e.g. 1 minute) before the shade moves out.
The light intensity has to be below the value for the set retraction delay period (e.g. 12
minutes) without interruption before the shade is retracted again. By selecting the de-
lay smartly, passing clouds are "ignored" and the shade still responds quickly to the
sun.
Movement delays:
Displays the extension and retraction delay in minutes. Tap the field and use the slider
to adjust the delay for extending when the sun comes out and for retraction.
Default setting: Extension 1 minute, retraction 12 minutes.
6.3.3. Set time switch period
System > Set automatic > General settings > Time switch period
16 periods can be set in the weekly clock, which can be used for various automatic
functions. The start and end time, and day of the week, are set for each period.
Time switch period:
Displays how many time switches are set. Tap the field to set up the time switches.
Select period from the list on the right and apply it. If no settings have been made, the
fields show
Time switch period 1...16
. The entered name is shown later.
Enter an
Name
to help you allocate the time switch to the motor or device later.
Select the
Start
and
End
.
Select the
Days of the week
, when the time switch is to apply.
