26
Setting of parameters
Indoor Sensor KNX AQS/TH
• Date of issue: 13.10.2011 • Subject to technical changes. Errors excepted.
If the target value is set by Parameter:
If the target value is set by Communication object:
Frost/heat protection:
4.5. Humidity measured value
Value of the activation object before
1. communication
• 0 • 1
Target value setpoint per
• Parameter
• Communication object
Target value setpoint per
Parameter
Target value heating in 0,1°C
-300 … 800
Target value cooling in 0,1°C
-300 … 800
Target value setpoint per
Communication object
The value communicated last shall be
maintained
• not
• After restoration of voltage
• After restoration of voltage and pro-
gramming (Do not use for first commis-
sioning)
Start threshold value in 0,1°C valid until
1. communication
(only if the value communicated last is
„not“ maintained or „after restoration of
voltage“)
-300 ... 800
Limitation of object value (min) in 0,1°C
-300 … 800
Limitation of object value (max) in 0,1°C
-300 … 800
Type of threshold change
• Absolute value
• Increment/decrement
Step size
(only if sending „Increment/decrement“)
0,1°C • 0,2°C • 0,3°C • 0,4°C • 0,5°C • 1,0°C •
2,0°C • 3,0°C • 4,0°C • 5,0°C
Use frost/heat protection
No • Yes
Target value heating in 0,1°C
-300 … 800
Delay of activation
(after opening window)
none • 1 s • 2 s • 5 s • 10 s • … • 2 h
Target value cooling in 0,1°C
-300 … 800
Delay of activation
(after opening window)
none • 1 s • 2 s • 5 s • 10 s • … • 2 h
Status of window before 1. communication
CLOSED • OPEN
Offset in %RH
-10 ... 10
Use external measured value
No • Yes
