30
Setting of parameters
Indoor Sensor KNX AQS/TH
• Date of issue: 13.10.2011 • Subject to technical changes. Errors excepted.
Dehumidification 1st stage
Dehumidification 2nd stage (two-stage dehumidifation only):
4.8. Dewpoint temperature
Start threshold value in % valid until
1. communication
(only if the value communicated last is
„not“ maintained or „after restoration of
voltage“)
0 … 100
Limitation of object value (min) in %RH
0 … 100
Limitation of object value (max) in %RH
0 … 100
Type of threshold change
• Absolute value
• Increment/decrement
Step size
(only if sending „Increment/decrement“)
1,0% • 2,0% • 5,0% • 10,0%
Maximum actuating variable is reached at
target/actual difference of
1 ... 50
Re-setting time in mins
1 … 255
If blocked, the actuating variable shall
• not be send
• send a specific value
Value in %
(only if sending a specific value)
0 … 100
With release the actuating variable follows the control
Target value difference between 1. and 2.
stage in %
0 … 50
Maximum actuating variable is reached at
target/actual difference of
1 ... 50
Hysteresis in 0,1°C
0 ... 100
Re-setting time in mins
1 ... 255
If blocked, the actuating variable shall
• not be send
• send a specific value
Value in %
(only if sending a specific value)
0 … 100
With release the actuating variable follows the control
Use dewpoint temperature
No • Yes
Dewpoint temperature sends
• not
• periodically
• on change
• on change and periodically
From change of
(only if sending „on change“)
0,1°C • 0,2°C • 0,5°C • 1,0°C • 2,0°C • 5,0°C
