3
Description
KNX Interface for WS1000
• Status: 15.04.2016 • Technical changes reserved. Errors reserved.
1.
Description
The
KNX Interface for WS1000
allows for communication between the WS1000
Color or WS1000 Style Control System and the KNX bus system. On the one hand, data
of the control unit can be sent to the KNX bus (e. g. weather data). On the other hand,
the WS1000 can control drives in the KNX system directly and use sensor data from
the KNX system.
Functions:
•
Transmission of data from WS1000 Color/Style to the KNX bus
: date/
time, position, weather data
•
Control of actuators
in the KNX bus system by the automatic functions of the
WS1000 Color/Style: awnings, blinds, roller shutters, windows, light
•
Transmission of bus data to the WS1000 Color/Style
: sensor data, push-
button commands
Configuration is made using the KNX software ETS. The
product file
can be down-
loaded from the Elsner Elektronik homepage on
www.elsner-elektronik.de
in the
“Service” menu.
1.1. Scope of delivery
•
Interface
•
KNX bus connector terminal
Interface and bus connector terminal are plugged on the board of the Control System
WS1000 Color/WS1000 Style.
1.2. Technical specifications
The product conforms with the provisions of EU directives.
Mounting
is plugged on the board of the Control WS1000
Dimensions
approx. 53 × 7 × 30 (W × H × D, mm)
Weight
approx. 10 g
Ambient temperature
operation 0…+50°C, storage -30…+70°C,
avoid bedewing
Operating voltage
KNX bus voltage
Bus current
max. 5,5 mA,
max. 9 mA when programming LED is active
Data output
KNX +/- bus connector terminal
BCU type
own micro controller
PEI type
0
Group addresses
max. 254
Assingnments
max. 254
Communication objects
254
