![background image](http://html1.mh-extra.com/html/elsner-elektronik/intra-sewi-knx-t/intra-sewi-knx-t_installation-and-adjustment_2396599009.webp)
7
Installation and start-up
Sensors Intra-Sewi KNX T and Intra-Sewi KNX TH
• Version: 11.06.2018 • Technical changes and errors excepted.
2.3.2. Installation in connector socket
Before socket installation, remove the clamps for the false ceiling installation.
Screw the support ring onto the socket. Pay attention to the orientation as shown in the
chapter
Coverage area of the motion detector
.
Connect the bus line to the KNX terminal (red/black).
Clamp the device in the support ring so that the springs on the device snap over the
tabs of the support ring.
A
Fig. 1
1
Clamps for installation in false ceiling
A
Height in wall (built-in): approx. 31 mm
B
Space behind the false ceiling, necessary for insertion (clear dimension):
approx. 31 mm
C
Maximum wall thickness: 20 mm
D
Hole size for installation: 50...65 mm
B
C
D
1
Fig. 2: Support ring
1
Tabs
1
1
Summary of Contents for Intra-Sewi KNX T
Page 2: ......