34
Setting the parameters
Nunio KNX M-T push button
• Version: 25.02.2021 • Technical changes and errors excepted.
Activate fan coil control if a fan is used for heating/cooling.
Select whether the first fan stage should be switched on when the second and the third
stages are on, and if the second fan stage should be switched on if the third stage is on.
9.6.
Buttons
Set how many buttons should be displayed on the screen, whether you want to block
operation and how many buttons you want to use.
If necessary, activate the buttons that you want to use. The menus for the other settings
of the push buttons are shown on them.
For the
Nunio KNX M-T push button
there is screen control with additional function.
It is activated by touching the display with the whole hand (see chapter 5.2). The value
of the activation object and the function is set for the screen control.
Enable the push button The menus for the other settings of the push buttons are shown
on them.
Analysis of the status object
• 0 = Heating 1 = Cooling
• 1 = Heating | 0 = Cooling
Use fan coil control
No • Yes
Switch stage 1 on also if stages 2 and 3 are
running
No • Yes
Switch stage 2 on if stage 3 is running
No • Yes
Layout
• No buttons
• 1 button
• 2 buttons vertical
• 2 buttons horizontal
• 3 buttons
• 4 buttons
Freeze controls
• Never
• If background lighting
in basic lightness
• If background lighting off
Use button 1 / 2 / 3 / 4
No • Yes
Use push button 1 (top left)
No • Yes
Use push button 2 (top right)
No • Yes
Use push button 3 (bottom left)
No • Yes
Use push button 4 (bottom right)
No • Yes
Summary of Contents for 71280
Page 1: ...Nunio KNX M T Push Button Item number 71280 EN Installation and Adjustment ...
Page 2: ......
Page 47: ......
