4
Installation and start-up
Actuators KNX R4 16 A and KNX R8 16 A
• Version: 28.05.2020 • Technical changes and errors excepted.
KNX R4 16 A (70571):
KNX R8 16 A (70570):
The product is compliant with the provisions of EU guidelines.
2.
Installation and start-up
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
•
VDE regulations and national regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
•
Do not use the device if it is damaged.
•
Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is no
longer guaranteed.
The device is only to be used for the intended purpose described in this manual. Any
improper modification or failure to follow the operating instructions voids any and all
warranty and guarantee claims.
After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when assem-
bled and after conclusion of all installation and operational start-up tasks and only in
the surroundings designated for it.
Dimensions
approx. 53 x 88 x 60 (W x H x D, mm), 3 modules
Weight
approx. 150 g
Outputs
4 × output, free of potential,
each power supply U | OUT
Communication objects
37
Dimensions
approx. 107 x 88 x 60 (W x H x D, mm), 6 modules
Weight
approx. 270 g
Outputs
8 × output, free of potential,
each power supply U | OUT
Communication objects
73
