background image

11

Addressing the equipment

Smoke alarm Salva KNX

 • Version: 30.01.2017 • Technical Changes and Errors excepted.

2.4.4. Completing the installation

Check if the LED is flashing and conduct a function test.

Function test

, page 12

3.

Addressing the equipment

The equipment is delivered with the bus address 15.15.250. You can program a differ-
ent address in the ETS by overwriting the address 15.15.250 or by teaching the device
via the programming button. 

The programming button is on the inside of the housing. The housing is removed from
the skirting by turning it anti-clockwise, and fixed in place by turning clockwise.

4.

Maintenance

In some German federal states, the owner of houses and flats are responsible for the
installation and functioning of smoke alarms according to LBO (State construction
laws) (see www.rauchmelder-lebensretter.de). Maintenance has to be conducted at
least annually and, according to DIN 14676 includes a visual inspection, a function test
and, if required, a battery change. A function test also has to be conducted after any
longer absence, at ,after 1 year at the latest.

The used battery and the device must be disposed of correctly so that 
valuable resources may be recycled. Neither the battery nor the device 
may be disposed of together with domestic or company

waste.

Fig. 8

Place the housing onto the skirting and fasten
it by turning it clockwise.

Fig. 9

Use a thin object to reach the button, e.g. a
wire.

Summary of Contents for 70405
















Reviews: