13
Transmission protocol
Power Supply Systems KNX PS640+ and KNX PS640+USB
Version: 19.08.2020 • Technical changes and errors excepted.
5.1. Setting of parameters (Software ETS)
5.1.1. General settings
Measured values:
15
Recall error information
(1 = No.+1 | 0 = No.-1)
Input
1.008
C R W
16
Message part 1
Output
16.000
C R T
17
Message part 2
Output
16.000
C R T
18
Message part 3
Output
16.000
C R T
19
Message part 4
Output
16.000
C R T
20
Threshold value: 16 bit value [mA]
Input / Output
9.021
C R W T U
21
Threshold value: 1 = Increment | 0 =
Decrement
Input
1.008
C R W
22
Threshold value: Increment
Input
1.017
C R W
23
Threshold value: Decrement
Input
1.017
C R W
24
Threshold value: Switching output
Output
1.002
C R T
25
Threshold value: Switching output
block
Input
1.003
C R W
26
Software version
readable
217.001
C R
Transmission behaviour object „bus
voltage“
• do not send
• send cyclically
• send in case of change
• send in case of change and cyclically
Sending cycle
(only if sending „cyclically“)
5 sec • 10 sec • 30 sec • 1 min • … • 2 h
Change in %
(only if sending „in case of change“)
1 … 50
Transmission behaviour object „bus cur
-
rent“
• do not send
• send cyclically
• send in case of change
• send in case of change and cyclically
Sending cycle
(only if sending „cyclically“)
5 sec • 10 sec • 30 sec • 1 min • … • 2 h
Change in %
(only if sending „in case of change“)
1 … 100
No. Name
Function
EIS
type
Flags
