UPServer2.0
ON-LINE DOUBLE CONVERSION
7.
Place the UPS on a flat, stable surface with the front of the cabinet facing to
you.
8.
Align the mounting brackets with the screw holes on each side of the UPS
and fix with the supplied M4×8 flat-head screws(see Figure 6)
Figure5 Installing the Mounting Brackets
9.
If installing optional cabinets, repeat Step 8 and 9 for each cabinet.
10.
Slide the UPS and any other optional cabinets into the rack.
11.
Secure the front of the UPS to the rack using one M5×12 pan-head screws and
one M5 cage nuts on each side(see Figure 7).Install the bottom screw on each
side through the bottom hole of mounting bracket and the bottom hole of the
rail.
Repeat for any optional cabinets.
Figure6 Securing the Front of the Cabinet
12.
Continue to the following section, “Rackmount Wiring Installation.
