background image

AXIOM

 

SLIDING

 

GATE

 

OPENER

 

MANUAL

 

H. Manual Release

 

The operator has an unlocking mechanism. Once it’s unlocked, the gate can be operated manually 
in both directions. The unlocking key is needed to unlock the motor. Please keep the key in a safe 
place for later use. The manual release lever is located towards the bottom of the operator. (See 
pictures below). Use the key to unlock the manual release lever. Once unlocked pull the lever so 
that it’s perpendicular to the motor. The gate can now be used manually.  

 

 

 
 
I. ELECTRICAL CONNECTION

 

After successful motor installation, refer to the user manual of the control card 
for automatic operation setup.

 

 

 

J. SOLAR CHARGE MONITORING APP* 

 

Once the gate is fully commissioned and operational, the solar charging monitoring app can be 
downloaded from the app store. This app will show the user the battery status in real time, 
charging current, battery voltage and the output of the solar panel. To download the app, go to 
the app store and search for VictronConnect. 
 

*Do not change any setting of the solar controller. It has already been optimised for the Li-
ion battery. Any changes will 

void the warranty

 and can cause damage to the battery and 

the solar changer. 

 

 
 
 
 
 

10

Summary of Contents for iS600Solar24

















Reviews: