iS300/iS300D/iS300Solar
SWING
GATE
OPENER
MANUAL
C. INSTALLATION OF REAR BRACKET
Step 1 :
Calculate the position of the rear bracket by using the details in Figure 1 and Graph 2. This Figure
and Graph establishes dimensions
A
,
B
and the
maximum
opening angle
. If your gate is opening 90˚
you can also use values for greater than 90˚ from Graph 2.
Step 2 :
Before securing the rear bracket to the pillar check the front bracket can be welded to a solid point
on the gate leaf.
Fully close the gate.
Connect the rear and front brackets to the motor.
Hold the rear bracket onto the pillar with the calculated
A
and
B
values.
Move the motor in a vertical direction until the fixing zone is in a solid area of the gate leaf for
the front bracket.
Step 3 :
Then fix the rear bracket to the pillar.
Figure 1 Graph 2
4
