Maintenance Details
WARNING!
Failure to maintain equipment may result in injury or death and/or damage to property and equipment
Recommended maintenance to be performed on the operator and gate are as follows:-
Operator performs over 150 cycles a day
each month
Operator performs between 100-150 cycles a day
every 2 month
Operator performs between 50-99 cycles a day
every 4 months
Operator performs between 20-49 cycles a day
every 6 months
Operator performs under 20 cycles a day
every 12 months
Date: ..............................................................................
Site Name: ..................................................................................................................................
Site Address: ...............................................................................................................................
Before
commencing maintenance on the operator, isolate the electrical supply to ensure operator will
not run inadvertently.
Gate rolls freely when in manual .................................................................................
Gate wheels and guide rollers in good condition..........................................................
Gate stops are installed and in good condition, not loose ............................................
Gate rack is tight & correct clearances between pinion wheel & rack ..........................
Gate track is not damaged...........................................................................................
Gate operator mounting bolts tight...............................................................................
No oil leaks from gearboxes ........................................................................................
Gearbox mounting bolts/nuts tight ...............................................................................
Inside operator and control box clean ..........................................................................
‘Baygon’ Surface Spray around operator and control box (not on electronics) .............
All electrical connections tight ......................................................................................
Limit Switches operate in appropriate positions ...........................................................
External safety devices work effectively / cleaned .......................................................
Electromagnetic lock, if fitted, operates correctly and is clean .....................................
Wash down of control box and cover (particularly near corrosive/sea environments) ..
General operation i.e. speed, auto close etc normal ....................................................
Comments.............................................................................................................................................
......................................................................................................................................................
….
...............................................................................................................................................................
Service performed by:
.................................................................................................................................................
