Installation
7
Installation under Windows
®
95
Depending on the version which you are using, Windows 95 presents one of two
possible procedures for the installation. Exactly which version you have will become
clear according to the message which appears after the computer has been
restarted.
Possibility 1:
a
After connecting the ISDN terminal adapter , your computer must be restarted.
Windows
®
95 displays the "New Hardware Found" window with the message
that the ISDN terminal adapter has been recognized as
ELSA TanGo 1000
.
b
Select the
Driver from disk provided by hardware manufacturer
option
and click on
OK
. The window "Install from Disk" is displayed.
c
Insert the CD supplied into the CD-ROM drive and click on
Browse
. The
"Open" window is displayed.
d
Change to your CD Rom drive (e.g. d:\) and click on
OK
.
e
Select the ISDN terminal adapter
ELSA TanGo 1000
under the window "Select
model" and confirm with
OK
. The required files will now be copied onto the
hard disk.
In the "Control Panel" under "Modems", your ISDN terminal adapter should be
correctly displayed under "Properties for Modems".
Possibility 2 (Windows 95 Service Release 2):
a
After connecting your ISDN terminal adapter, your computer must be
restarted. Windows 95 displays the "New Hardware Found" window followed
by the "Update Device Driver Wizard".
b
Insert the CD supplied
into the CD-ROM drive and click on
Next
. After the
drivers have been found click on
Next
. The "Update Device Driver Wizard"
appears again with the message "Windows found the following updated driver
for this device:
ELSA TanGo 1000
".
c
Continue with
Next
. The files required will now be copied.
In the "Control Panel" under "Modems", your ISDN terminal adapter should be
correctly displayed under "Properties for Modems".
Summary of Contents for TanGo 1000
Page 2: ......
