ELSA TanGo 1000, Installation Manual

Page: 10 / 26

Installation
8
Installation under Windows NT
®
4.0
This procedure describes how you install your ISDN terminal adapter under
Windows NT 4.0.
a
After connecting the ISDN terminal adapter, restart your computer.
b
Use your mouse to follow the command sequence
Start
,
Settings
,
Control
Panel
,
Modems
. In the dialog window "Install New modem", click on
Next
to
start the modem identification. The
ELSA TanGo 1000
will initially be
identified as standard modem.
c
Click on
Change
to select the ISDN terminal adapter. The "Install New
Modem" window will be displayed.
d
Now click on "Diskette" in the "Install new modem" window.
e
Click on
Browse
and access the directory
\Driver\Winnt40
on the supplied
CD, select
Open
and then confirm with
OK
.
f
In the dialog window "Install New Modem", select the ISDN terminal adapter
ELSA TanGo 1000
, confirm with
OK
and then click on
Next
.
g
Click on
Finish
to close the installation.
The
ELSA TanGo 1000
can now be operated from Windows NT 4.0. The software
components of Windows NT 4.0, such as HyperTerminal and Dial-up Network, can
make direct use of the ISDN terminal adapter.
Where Do I Find What?
After you have installed the ISDN terminal adapter under your operating system,
you can install the application software.
In the manual...
...you can read up on how to install the software under the various operating
systems. It shows you how you can deal with any problems that might arise, and
describes the operation of your ISDN terminal adapter.
In addition, the manual contains technical data and additional advice for operating
your ISDN terminal adapter.
On the CD...
...you will find not only the software, but also utilities for operating your ISDN
terminal adapter. Each subject has a README file which contains detailed
information about the software concerned. The README files always contain the
most up-to-date information.
For a detailed description of the contents of the CD, just open the README file in
the CD's root directory.