Document: EP6002Eb
INITIAL STARTUP
7 - EN
2.2
LAN Connection
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
2.3
WLAN Connection
Step 1
Step 2
Step 3
The PC used for configuration must be in the same network as the ECOLOG-PRO
Base.
Connect the cable and power supply
unit.
ECOLOG-PRO Base starts.
Start process.
Wait for the confirmation tone indicating ready
(operating system started).
Plug in the USB stick.
Wait for the confirmation tone (Success, Error).
Remove the USB stick.
Plug the USB stick in the PC.
File: Open the file NetworkConfig.txt.
Use the IP address below the line “Desc: Intel(R)
Ethernet Connection (2) I219-V" to log in to the
ECOLOG-PRO Base.
Open your web browser and run
initialization.
2.4
Initialization
Path: http://
192.168.253.106
/Maintenance
Create the file WlanConfig.txt on a USB stick.
Enter the SSID name in the first line and the
WLAN password in the second line.
If a password is not required for the WLAN, leave
this line blank.
Encryption is set to WPA2.
Connect the power supply unit.
ECOLOG-PRO Base starts.
Plug in the USB stick.
Wait for the confirmation tone (Success, Error).
