Document: EP6002Eb
ECOLOG-PRO BASE MAINTENANCE
16 - EN
3.6
WebAccess
Settings - WebAccess
• WebAccess Active
Tick this checkbox to start or stop the elproMONITOR WebAccess service.
• Interval
Interval Dropdown menu the select the interval for updating data entries.
• The selection options are 1, 5, or 10 minutes.
Maximum 2000 entries corresponding to 2000 measured values per sensor can be
written to the logger protocol.
• Number of entries for alarm protocol
Maximum 500 entries corresponding to 500 measured values per sensor can be written
to the alarm protocol.
• Alarm/Group/Logger Directory
These three boxes define the names of the directories in each case. The 3 directories
are created as subdirectories on the network drive specified.
• The alarm protocol is created in the alarm directory as a CSV file.
• A CSV file is created in the group directory for each sensor group created.
• A CSV file is created in the logger directory for every ECOLOG-NET logger and for
every ECOLOG-PRO measurement module (4PT, 4MA, 2TH).
A CVS file is created for each “Operation mode” (Standard, Time Monitor, and Edge
Counter) for the ECOLOG-PRO 4DI measurement module. Please refer to the opera-
tion manual of the elproMONITOR software for details on the various modes.
SM3031E elproMONITOR operation manual
