Appendix A
System Example
man_905_2.0.doc
Page
59
Tank Station Configuration
The 105U-2 module has the following configuration :-
Note the following points in the configuration :
•
The configuration software used was CFG105-2.EXE as the module is a 105U-2.
•
The system address is 10587 (a random selection) and unit address is 2.
•
PIN1 (the flow meter) is mapped to Out3 (D/P output 3) at #96 which is the control station -
#1 is a repeater.
•
The pulse rate for this PIN (PLSR1) is mapped to Out2 at #97 via #1. This is AO2 of the
105S-3 at the control station. Remember that the 105S-3 has two addresses - the lower
address is used for the digital outputs, and the higher address is used for the analogue outputs.
