Radio/Serial Telemetry Module
User Manual
Page
44
©
March 2000
•
Select the appropriate serial port from the list provided (COM1 - COM4)
•
From the Communication menu, select “Program The 105”
The configuration program will now attempt to download the configuration data to the 905 module.
If all goes well, a “Programming” prompt will appear. This prompt will remain until programming of
the 905 is complete. If the 905 is not correctly connected, or is not turned on, it may take up to a
minute for the configuration program to stop trying to connect to the 905.
Loading existing Configuration from the 905
To download the configuration from a 905 for editing or simply for checking, follow the following
steps:
•
Connect the cable from the PC’s serial port to the 905 serial port.
•
From the Communication menu, select “Select Comms Port”
•
Select the appropriate serial port from the list provided (COM1 - COM4)
•
From the Communication menu, select “Load Config from 105”
The configuration program will now attempt to upload the configuration data from the 905. If all
goes well, a “Loading” prompt will appear. This prompt will remain until loading of data from the
905 is complete. If the 905 is not correctly connected, or is not turned on, it may take up to a
minute for the configuration program to stop trying to connect to the 905.
