Chapter Five
Specifications
Page
27
©
February 2005
10.
Set the Ethernet IP address to 192.168.0.200, network mask 255.255.255.0
11.
Set the Wireless IP address to 192.168.0.200, network mask 255.255.255.0
12.
Set the system address to “ExampleSystem1”
13.
Enable Radio Encryption and enter key 1 as 01:02:03:04:05, key 2 as 06:07:08:09:0A, key 3
as 0B:0C:0D:0E:0F, key 4 as 10:11:12:13:14.
14.
Click on button Save to Flash and Reset. Webpage will display that message indicating
details are being written to flash. Wait for 905U-E to reboot before removing power.
Client 1 Configuration
Perform the same configuration steps as the Access Point configuration with the following
differences:
•
At step 0 in Option B, set IP address of 905U-E to 192.168.0.201 with command bip
192.168.0.201
•
At step 0 in Option B, open configuration webpage with Internet Explorer at address
http://192.168.0.201/
•
At step 7, set the Operating Mode to Client.
•
At step 10, set the Ethernet IP address to 192.168.0.201, network mask 255.255.255.0
•
At step 11, set the Wireless IP address to 192.168.0.201, network mask 255.255.255.0
Client 2 Configuration
Perform the same configuration steps as the Access Point configuration with the following
differences:
•
At step 0 in Option B, set IP address of 905U-E to 192.168.0.202 with command bip
192.168.0.202
•
At step 0 in Option B, open configuration webpage with Internet Explorer at address
http://192.168.0.202/
•
At step 7, set the Operating Mode to Client.
•
At step 10, set the Ethernet IP address to 192.168.0.202, network mask 255.255.255.0
•
At step 11, set the Wireless IP address to 192.168.0.202, network mask 255.255.255.0