uK PluG rewIrInG
Your appliance operates on 350w-230v-50Hz AC Mains and comes fitted with a
3-pin BSI Approved plug, so that it is ready for use by simply plugging into AC
Mains. Should you need to change or refit a plug, proceed as follows:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
BLUE : NEUTRAL (N)
BROWN : LIVE (L)
GREEN &YELLOW : EARTH (E)
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in you plug, proceed
as follows:
The wire which is coloured BLUE must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is
marked with the letter “L or coloured RED.
The wire which is coloured GREEN & YELLOW must be connected to the
terminal which is marked with the letter “E” or or coloured GREEN.
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL OF A 3-PIN PLUG
Always ensure that the Mains Cord is located into the Plug through the Cord
Guard or Cable Clamp, and that the Cord Guard screws are lightened to clamp
the Cord (outer sheath and inner coloured wires) in position in the Plug. Make
sure the Plug top is also fitted securely.
This appliance must be protected by a 5-amp fuse in a 5-amp type (BS1363) plug. Should you need
to replace the fuse, use only an ASTA approved BS 1362 fuse.
THIS IS NOT A TOY: KEEP THIS PRODUCT OUT OF REACH OF CHILDREN.
THIS APPLIANCE IS NOT INTENDED FOR USE BY CHILDREN.
31201c
