background image

Operating Instructions No. 9999-043-0

Seite 9

B7215e01_2.pmd

Rel. 1 vom 10.09.2003

Operation, button(s)

Response

Initiate programming
Select P No. 1
Confirm the entry
Select user number 9
Confirm the entry
Enter the 6-digit master combination, e.g.
Confirm the entry
Confirm the entry

Cancel

If there is an error in
programming, then the
previous override
combination will continue
to be valid.

Comments

10.8.1 Deleting an override combination

This may be done only with the electronic lock open and only with the master combination.

Function

Green LED blinks once

Close the lock:
Press any digit button.

OK = green LED lights and
low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.

10.9 Programming a time-lock period

This may be done only with the electronic lock open and only with the master combination.

Function

Operation, button(s)

Response

Initiate programming
Select P No. 6
Confirm the entry
Enter the 6-digit master combination, e.g.
Confirm the entry
Enter the time-lock period °. e.g. 1 hour
Confirm the entry

Cancel

°

= 1 hour to
= 99 hours.

Comments

Green LED blinks once

OK = green LED lights and
low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.

Following the final entry confirmation the electronic lock will respond to no keyboard commands whatsoever during the
specified time-lock period. After the programmed time-lock period has elapsed the electronic lock may be opened with the
master combination or a user combination.

A programmed time-lock period will automatically be deleted once the period has run to an end.

11. Triggering a silent alarm

To trigger a silent alarm, increase by 

1

 the final digit of your master combination or user combination.

Master or user combination       Master or user combination for silent alarm

1 2 3 4 5 6

1 2 3 4 5 7

1 2 3 4 5 9

1 2 3 4 5 0

Example:

Once a silent alarm has been activated, the lock will open in the same way as if the master combination or a user combination
had been entered. This also applies to any programmed delay period or a combination interlock.

Enter UNo. and the master or user combination for silent alarm

°

° Button     for UNo. 0  (master combination)
  Button     for UNo. 1  (user combination)

    Button     for UNo. 2  (user combination)

etc. through

    Butto       for UNo. 9  (user combination)

Entering the combination:

Summary of Contents for 7215













Reviews: