6
2.
Equipment set up
Transport of units
Use elevating truck or fork–lift truck for transport. Transport only on pallets.
Observe door width and door height when transporting the units.
2.1
Installation instructions
To prevent injury, always lift the appliance off the pallet with the aid of a second person → risk
of crushing.
Follow the local regulations and observe the instructions for the installation of kitchen and
shop equipment.
If using the marine version, attach the additional fastening elements supplied.
Remove all cartons, packing materials, documents from the interior cabinet.
No heat or steam sources may be installed underneath the oven.
There must not be any sources of heat or moisture underneath or in the
immediate vicinity of the appliance (such as deep fat fryers or portable stoves).
In case of installation close to materials that risk burning, observe the instructions of fire
prevention.
Minimum distance from sources of heat and moisture: 500 mm
When using deep fat fryers or portable stoves next to the appliance, make sure that they are kept
at a suitably safe distance from it (based on the radius of action of the shower head). There is a
serious risk of the operator sustaining burns if water is sprayed into hot fat.
To ensure conformity with NSF, retrofit
the
device with the Foot Extension Kit 623.
2.2
Recommended minimum clearance
The machine may only be set up in a location with adequate lighting for users.
We recommend to install the ovens on top of original Eloma lower racks/supports or wall brackets.
In case of installations on top of worktables, ensure sufficient stability and load capacity.
(weight of an empty oven approx. 50 kg).
It is mandatory to set up the appliance in horizontal position. True up minor unevenness with
the vertically adjustable feet.
Distance to walls on right, left and back side at least 50 mm. In case of installations near to
materials that risk burning, observe the instructions of fire protection.
The equipment must be secured against tilting and falling down.
Net weight ca. 65 kg
2.3
Noise level
The emission value of the noise level is less than 70 dB (A).
2.4
Exhaust air
A built-in cooling function cools down water and steam of condensation, which runs down the
drain. It is therefore not necessary, however recommended, to install the appliance under a
ventilation hood.
If such a hood is installed, its design and power rates should comply with the German VDI regulation
2052.
Condensation hood (option)
An optional condensation hood is available for Eloma combi steamers.
The condensation hood is controlled fully automatically via the combi steamer.
During the cooking process, steam is condensed as it passes over air-cooled plate condensers.