Elo TouchSystems E391994, User Manual

Page: 77 / 81

UM600xxx Rev 01, page 77 of 81
User Manual
–
Elo I-Series 4
ii.
Reposition (turn) the digital device with respect to the affected receiver.
iii.
Reorient the affected receiver’s antenna.
iv.
Plug the digital device into a different AC outlet so the digital device and the receiver are on
different branch circuits.
v.
Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential
source of high RF emission levels.)
vi.
Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs. (Removing or cutting the
line cord ground may increase RF emission levels and may also present a lethal shock hazard to the user.)
If you need additional help, consult your dealer, manufacturer, or an experienced radio or television technician.
Radio Equipment Directive
Elo hereby declares that the radio equipment type, Elo handheld Computer, is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: www.elotouch.com
This device is designed and intended for indoor use only.
Operation frequency and radio-frequency power are listed as below:

WLAN 802.11b/g/n/ac
o
2400 - 2483.5MHz < 17 dBm EIRP
o
5150 - 5250MHz < 18 dBm EIRP