2-25
Magnetic Stripe Reader
No drivers are needed.
Testing the Serial Version:
1
Insure the MSR serial is connected. (Make a note of the serial port, COM1, COM2, etc.
it is connected to.)
2
Launch
HyperTerminal
3
Go to
file
>
new connection
and type “
MSR
” then select
OK
.
4
In the
Connect to Menu
select
Com port
used in step one, then select
OK
.
5
In the
Connection Property
box set the following values:
•
Bits per second to 9600
•
Data Bits to 8
•
Parity to None
•
Stop bits to 1
•
Flow control to Hardware
The device will immediately display the serial number. Slide any credit card
through the MSR to view the data.
Testing the USB MSR Keyboard Emulation
1
Plug in the device.
2
Open MS Word.
3
Slide the card through the MSR to view the data.
Testing the USB-HID Class MSR
1
On the CD, browse to
Touch Monitor Peripherals\Magnetic Stripe Card
Readers\Demo.
2
Open the
Readme.txt
and follow instructions to test the unit.
Summary of Contents for 1229L(WWW)
