User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 28 of 51
Chapter 4: Options and Upgrades
Adding Optional Upgrades
The X-Series had quality below optional upgrades material for different or additional
requirement to the system unit. To add the optional upgrades, the complete installation and
setup instructions are provided with the field-installable kits.
320GB 5400rpmHard Disk Drive (HDD)
500GB 7200rpmHard Disk Drive (HDD)
1TGB 5400rpm Hard Disk Drive (HDD)
64GB 2.5
” SATA SSD
128GB 2.5
” SATA SSD
2GB DDR3L Memory SO-DIMM
4GB DDR3L Memory SO-DIMM
8GB DDR3L Memory SO-DIMM
Optional Peripherals KITs
The following optional accessories and spare parts are available for purchase from Elo Touch
Solutions. Shown in parenthesis is the Elo orderable part number.
Biometric Fingerprint Reader KIT (E001001)
- Fingerprint reader with USB interface for all X-Series configurations.
Magnetic Stripe Reader KIT (E001002)
- MSR with USB interface for all X-Series configurations.
Rear-Facing Customer Display KIT (E001003)
- The vacuum fluorescent display with USB interface for all X-Series
configurations.
Near Field Communication KIT (E001004)
- NFC reader with USB interface for all X-Series configurations.
7-Inch LCD Second Display KIT (E807955)
- ET-0700L: 7-Inch Rear-facing LCD customer display with USB interface for all
X-Series configurations.
Expansion Module KIT (E001006)
- The expansion module is an optional kit for X-Series touchcomputer. It is
mounted to the center of the system back cover as a peripheral port for all
X-Series configurations.
